Jul 25, 2013

Android Jelly Bean 4.2.2 v1.1 firmware installed on Pipo S1 tablet

Here is the easiest to do this firmware update:
1. Download Android Jelly Bean 4.2.2 v1.1 firmware image from: link1 or link2.
2. Put your Pipo S1 in 'firmware update mode'.
3. Run Rockchip Batch Tool v1.7, select the proper image .img file from your desktop, and after your device is found by the program, press the 'Restore' button and wait for 2-3 minutes to finish. The first boot is very long, wait about 5-7 minutes.


What we have at the moment:
- Firmware 4.2.2 from PIPO S1S
- Removed Chinese applications
- Added root
- Default language English
- Customise kernel
- G-sensor is operating

- Camera is working
- HDMI output is working
- Antutu produces about 11.647 points

- Wifi Display Miracast support


Credits for this firmware go to realmaple.



1. To install the CWM 6.0.2.7 please follow the update steps from this post. Then download CWM 6.0.3.1 from here or from here and copy it as it is on a micro SD card, install Quick Boot free from Play store, reboot into recovery, then choose 'install zip from sd card' and apply the new CWM zip file from your card. Enjoy CWM 6.0.3.1 on your tablet!



2. To install NAND fix. First download 1_RK30_JB_Format_NAND.zip from here, here or here. Copy it on micro SD card, install Quick Boot free from Play Store, run it and boot into recovery. Install zip from SD card and reboot. You're done!


Enjoy this firmware release, share is love!  

 Always keep in mind that this is not a review, just a first sight of this firmware. You have to test it more for another details, to see if it satisfies your needs.

25 comentarii:

Miguel Sandoval said...

I tested, it works fine but WiFi does not work properly, when the tablet goes to sleep mode it loses connection to internet. It's set to be always on but you can't receive messages, video calls (Skype, Hangouts, ect.) emails, ect. I use it with a wired keyboard and with other ROMS I used to wake it up by pressing any key but with the latest firwares that doesn't work as well.

Natalie JĂșnior said...

How much is there internal storage? And is it fast?

Dan Stefan said...

@Miguel Sandoval
Please install this zip from CWM and report back http://rapidshare.com/files/1722037957/S1_wifi_fix_by_danyrolux.zip

Cristian Czinege said...

I understand that its rooted , please tell me the partition are 1 GB or 2 primary ?

Cristian Czinege said...

To install NAND fix whats its mean?

without the nand fix what happen? or if you install what is doing?

and please tell me if i will install this firmware then the partition is only 1 gb and 5 the rest or 2 and 4? thanks

gussieg said...

hi tried to do this but as the firmware file was coming up as a rar file instead of an img file, it wouldnt load.

Bogdan Alexandru said...

Salut Dan... ce zici sa pun rom-ul asta? fixeaza faza cu speakerul care nu se oprea si se auzeau sunete dalea ciudate cand sta tea inchisa tableta? sd cardul se mai scoate singur? adica sd card fall ala ? jocurile merg bine? ai cv informatii? l-ai testat? te rog astept raspuns ca sa stiu ce fac

Miguel Sandoval said...

I installed the zip file but it didn't fix it.

Cristian Czinege said...

its very nice at least hdmi works and antutu score its 11990 its very stable and nice, eventualy in future it will be nice to have at least 2gb or 4gb internal memory :)

Cristian Czinege said...

gussieg said...
hi tried to do this but as the firmware file was coming up as a rar file instead of an img file, it wouldnt load.
please use Winrar to take out the img from the archive...
put extract here after you install winrar and then its ok there its the file i supossed no?

Cristian Czinege said...

Hy after testing for almost 10 days im sorry to say but this is not stable version at all.give me errors like the screen its broken its like you have 5 screen each other and the screen text or graphic its vibrating and bloked the tabletits random i think happen to me at least 4 ./5 times and sometimes i read text news and give me a new empty page and block the tablet... With the vojager sumvision i think that not happen this . its fast this version but not stable at all. Please share everyone your problems if you had this too.. Thanks. Globula neagra from arctablet forum says that will release a new firmwarw in 5 days. Ihope that will be stable not like this. Thanks

Nils Heidorn said...

Cristian: afaik you can change the partition distribution quite easily in the "parameters" file. I did this before. Often there are 2 or more variants in the rockchip firmwares, the difference is easy to see, just an adress shift.

Nils

Cristian Czinege said...

hy here apear another custom firmware rooted from sumvision from arctablet kasty...

http://www.arctablet.com/blog/forum/pipo-s1-ds733/sumvision-cyclone-voyager-7-pipo-s1-compatible-rooted-android-4-2-2-firmware-release-20130709/

Cristian Czinege said...

Here is an Android 4.2.2 Jelly Bean rooted firmware for the Sumvision Cyclone Voyager 7" tablet, it is based on the official firmware update from Sumvision.
This custom firmware should be compatible with the PIPO S1 (DS733) tablet.

Build information:
Kernel: Linux version 3.0.36+ (root@alex-System-Product-Name) (gcc version 4.4.3 (GCC) ) #24 SMP PREEMPT Tue Jul 9 20:24:52 CST 2013
Android 4.2.2 JB: rk30sdk/rk30sdk/rk30sdk:4.2.2/JDQ39/eng.root.20130705.123608:eng/test-keys

Custom firmware features:

root with latest SuperSU version 1.51 (free version)
removed most Chinese and unnecessary applications
Google Play Store fixes so more application are visible/compatible
updated busybox v1.21.0.git (2012-11-29)
Unix like init.d boot scripts support, more details on init.d scripts here
changed permissions on external sdcard to allow write access
increased space for applications (/data partition) to 2 GB

- HDMI NOT WORKING - EVERYTHIN ELSE ITS OK STABLE.....
11650 ANTUTU SCORES

http://www.arctablet.com/blog/downloads/firmware/Sumvision/kasty-sumvision_cyclone_voyager_7-422-20130709-rooted0.zip

Matthew Hunter said...

When searching for Videos in YouTube I get "Invalid request message".

Tried resetting, re-installing you tube... but no luck :(

Any ideas?

Tayyab Ali said...

Can you increase the data partition to atleast 2GB? Otherwise this firmware is great!

Dane said...

I modified this to have a 2GB app partition. If anyone wants me to upload it.

Dan Stefan said...

@Dane
Please share it wit us; upload the patch and give us the link.
Thank you!

Dane said...

Will post link later today.

Dane said...

I have modified ANDROID JELLY BEAN 4.2.2 V1.1 FIRMWARE INSTALLED ON PIPO S1 TABLET to have a 2GB app partition if anyone is interested, I will upload it to google docs. As Always credit for this firmware goes to real maple.

Here is the google docs link: https://docs.google.com/file/d/0B2OQ...R1k/edit?pli=1

Dan Stefan said...

@Dane
Your link is broken...

Dane said...

Link should look like this, not .... I don't know why it put that.

https://docs.google.com/file/d0B2OQTChJ7YMydzZ2Z19wOHFfR1k/edit

Dan Stefan said...

@Dane
The link is not good. The file doesn't exist... :(
Please upload to mediafire, filefactory or rapidshare...
Thanks...

Dane said...

https://docs.google.com/file/d/0B2OQTChJ7YMydzZ2Z19wOHFfR1k/edit?usp=sharing

Dane said...

I have posted the link to the Android Addicted facebook page, and verified the link does indeed work.

Post a Comment

Twitter Delicious Facebook Digg Stumbleupon Favorites More

 
Powered by Blogger