9:00 AM
danyrolux
Here is the easiest to install this firmware:
1. Download BQCM10SAG archive from: link1 or link2.
2. Put your Pipo S1 in 'firmware update mode'.
3. Extract the archive and run RK30update.exe, uncheck Boot, check Kernel and select kernel_maple_#117, and after your device is found by the program, press the 'Actualizar' button and wait for 2-3 minutes to finish.
4. After first boot go directly to 'Settings'--> 'Developer Options' and check these options: USB Debugging and in 'Security'--> enable 'Unknown Sources'.
5. Shut down the tablet and then turn it on. Use ES Explorer to navigate to your external micro SD card and install 'full!screen+' or 'Button Savior Root' application.
1. Download BQCM10SAG archive from: link1 or link2.
2. Put your Pipo S1 in 'firmware update mode'.
3. Extract the archive and run RK30update.exe, uncheck Boot, check Kernel and select kernel_maple_#117, and after your device is found by the program, press the 'Actualizar' button and wait for 2-3 minutes to finish.
4. After first boot go directly to 'Settings'--> 'Developer Options' and check these options: USB Debugging and in 'Security'--> enable 'Unknown Sources'.
5. Shut down the tablet and then turn it on. Use ES Explorer to navigate to your external micro SD card and install 'full!screen+' or 'Button Savior Root' application.
Enjoy this firmware release, share is love!
Always
keep in mind that this is not a review, just a first sight of this
firmware. You have to test it more for another details, to see if it
satisfies your needs.
0 comentarii:
Post a Comment